Author Topic: Lock Picking  (Read 1148 times)

Offline DMCakhunter

  • Committed prepper
  • *****
  • Posts: 574
  • Karma: +4/-0
Lock Picking
« on: September 08, 2015, 09:32:11 AM »
I had posted some time ago about picking locks and how much fun it was for my kids to practice. Well, it finally paid off. In cleaning up my late fathers estate, seems the key to the camper was lost. Took all of 10 seconds for my oldest to get the door lock opened. Saved my mom from calling an expert. We have sets from a company called Sparrows, http://www.sparrowslockpicks.com/Default.asp

Offline APX808

  • Administrator
  • *****
  • Posts: 1816
  • Karma: +10/-0
    • APX R4nt5
Re: Lock Picking
« Reply #1 on: September 08, 2015, 10:48:59 PM »
I used to lockpick a few years ago, mostly padlocks. Every Friday I met with some friends and we competed who could open 5 padlocks faster :D
Here in Argentina we use double sided keys, you can't lockpick those, remember that if you want to keep something safe

Double sided keys look like this:


Offline JohnyMac

  • Administrator
  • *****
  • Posts: 15103
  • Karma: +23/-0
Re: Lock Picking
« Reply #2 on: September 09, 2015, 07:24:19 AM »
My lock pick or on occasion I use this pick:o
Keep abreast of J6 arrestees at https://americangulag.org/ Donate if you can for their defense.

Offline APX808

  • Administrator
  • *****
  • Posts: 1816
  • Karma: +10/-0
    • APX R4nt5
Re: Lock Picking
« Reply #3 on: September 09, 2015, 09:32:27 AM »
Those are fast, but noisy and I think people will notice you where playing with their locks :P

Offline Shadow

  • Novice Prepper
  • **
  • Posts: 54
  • Karma: +2/-0
Re: Lock Picking
« Reply #4 on: September 09, 2015, 10:10:14 AM »
Locks only keeps out the honest people.

I haven't found a lock yet that a 4 1/2 inch grinder and a .045 cut off wheel couldn't remove.

I have a set of bolt cutters - 3 foot long handles - that will cut just about anything...

Offline Kbop

  • Hardcore Prepper
  • ******
  • Posts: 1824
  • Karma: +10/-0
Re: Lock Picking
« Reply #5 on: September 09, 2015, 03:45:17 PM »
im a fan of the slide hammer or dent puller with a chuck on the end.  drill a small whole in the cylinder and insert a screw.  attach the slide hammer and yank the cylinder out.  not quick, but quiet and doesn't rip the door out of the frame.
-
not the best example but it explains how to do it.
https://www.youtube.com/watch?v=E1Z3OZBV_sA

Offline thatGuy

  • Kind Lover
  • Community Moderator
  • *****
  • Posts: 3454
  • Karma: +12/-0
    • thatGuy's youtube
Re: Lock Picking
« Reply #6 on: October 17, 2015, 12:25:12 PM »
Here is the way I do ;)



EDIT: I uploaded the video to youtube for easier watching, video is unlisted, it will only appear from here. - APX.808
« Last Edit: October 17, 2015, 08:33:54 PM by APX808 »

Offline Nemo

  • Hardcore Prepper
  • ******
  • Posts: 6515
  • Karma: +17/-2
  • From My Cold Dead Hands
Re: Lock Picking
« Reply #7 on: October 17, 2015, 08:41:24 PM »
HHMMM, said I am not permitted to access that.  And I am logged in and everything.

If I have been bad tell me and I will go sit in the corner.   :'(

But this is my lockpick.



Nemo

Dayum, I hit the post button and as the page reloaded, it opened and the red writing was above.  Guess I can get out of the corner!!   :fuckYeah:
« Last Edit: October 17, 2015, 08:48:04 PM by Nemo »
If you need a second magazine, its time to call in air support.

God created Man, Col. Sam Colt made him equal, John Moses Browning turned equality to perfection, Gaston Glock turned perfection into plastic fantastic junk.