« previous next »
Pages: [1]

Author Topic: Knife Grip Making  (Read 870 times)

Offline Nemo

  • Hardcore Prepper
  • ******
  • Posts: 6575
  • Karma: +17/-2
  • From My Cold Dead Hands
Knife Grip Making
« on: September 04, 2015, 11:23:34 PM »
I cannot find a forum here for knives so this is here.

Anyway, I have a knife I got about 10 years ago from a guy just getting started in knife making and leather doings.  Note pics below. 

The knife is home made from steel.  It holds and edge well.  You know know as much about that as I do.  But it is stainless and has not got the least corrosion in 10 years so . . ..  But it takes some serious work to get that edge on it.  It took one of those WorkSharp belt ones to get it on there.

Its about 4.5 inches total.  But note the grip area. Smooth and slippery.  I need ideas to put some roughness on it to let it be held without major worry of cutting the #(% out of fingers.  I already have a decent sheath made for it.  Leather project #2 of my life.  See sewing pouch for wife for details on #3.

I was thinking a band saw with a hack saw blade in it and numerous shallow thin cuts.  Also I was thinking of grinding a divot in the area a bolster would be and underneath at the heel of the blade but it needs more.  It is slick just as it is.  Wet with blood or such it will be very slippery.

Other ideas or comments gent?

Nemo


pretty good knife sharpener

http://www.amazon.com/Work-Sharp-WSKTS-Knife-Sharpener/dp/B003IT5F14

« Last Edit: September 04, 2015, 11:26:50 PM by Nemo »
Logged
If you need a second magazine, its time to call in air support.

God created Man, Col. Sam Colt made him equal, John Moses Browning turned equality to perfection, Gaston Glock turned perfection into plastic fantastic junk.

Offline JohnyMac

  • Administrator
  • *****
  • Posts: 15216
  • Karma: +23/-0
Re: Knife Grip Making
« Reply #1 on: September 05, 2015, 07:54:01 AM »
Me, I would take a good metal file to it and file a cross pattern e.g. ####

On another note: One of the worst metals to sharpen is one made of stainless steel. That is why I do not like Henckel knives. That is why I buy restaurant grade Forschner knives for the kitchen.
Logged
Keep abreast of J6 arrestees at https://americangulag.org/ Donate if you can for their defense.

brat

  • Guest
Re: Knife Grip Making
« Reply #2 on: September 05, 2015, 08:06:02 AM »
I'd use a dremel tool to checker the handle. Stainless is hard to get an edge, but any knife blade, to be super sharp, needs stropping IMHO. You can use old leather or new and you'll need some Herb's Yellowstone.
Logged

Offline Nemo

  • Hardcore Prepper
  • ******
  • Posts: 6575
  • Karma: +17/-2
  • From My Cold Dead Hands
Re: Knife Grip Making
« Reply #3 on: September 05, 2015, 09:44:56 AM »
Quote from: JohnyMac on September 05, 2015, 07:54:01 AM
Me, I would take a good metal file to it and file a cross pattern e.g. ####

I have tried a file on it.  It is one hard metal.

Quote from: brat on September 05, 2015, 08:06:02 AM
I'd use a dremel tool to checker the handle. Stainless is hard to get an edge, but any knife blade, to be super sharp, needs stropping IMHO. You can use old leather or new and you'll need some Herb's Yellowstone.

Dremel is a good idea that I had not considered

Finish edge I do on that machine with the 6000 grit belts.  That does pretty darn well.

Nemo
 
Logged
If you need a second magazine, its time to call in air support.

God created Man, Col. Sam Colt made him equal, John Moses Browning turned equality to perfection, Gaston Glock turned perfection into plastic fantastic junk.

Offline JohnyMac

  • Administrator
  • *****
  • Posts: 15216
  • Karma: +23/-0
Re: Knife Grip Making
« Reply #4 on: September 06, 2015, 07:38:21 AM »
brat nailed IT! Use a Dremel tool.
Logged
Keep abreast of J6 arrestees at https://americangulag.org/ Donate if you can for their defense.

Offline Nemo

  • Hardcore Prepper
  • ******
  • Posts: 6575
  • Karma: +17/-2
  • From My Cold Dead Hands
Re: Knife Grip Making
« Reply #5 on: September 06, 2015, 09:38:12 AM »
Plastic Dip? Spray in truck bedliner?

Thoughts?

Nemo

http://www.plastidip.com/
Logged
If you need a second magazine, its time to call in air support.

God created Man, Col. Sam Colt made him equal, John Moses Browning turned equality to perfection, Gaston Glock turned perfection into plastic fantastic junk.

Offline crudos

  • Community Moderator
  • *****
  • Posts: 2565
  • Karma: +7/-2
  • Expect Resistance
Re: Knife Grip Making
« Reply #6 on: September 06, 2015, 08:44:34 PM »
Could try some grip tape on it, something like skateboarders use, or handguns like GT-5000. Trying to go at that chunk of metal with a dremel would not be my idea of a good time.
« Last Edit: September 06, 2015, 08:46:05 PM by crudos »
Logged

Offline Kbop

  • Hardcore Prepper
  • ******
  • Posts: 1824
  • Karma: +10/-0
Re: Knife Grip Making
« Reply #7 on: September 06, 2015, 10:25:04 PM »
the truck bed liner goo is an option I hadn't heard of before.
cool idea.
 :thumbsUp:
Logged
Pages: [1]
« previous next »