Unchained Preppers

General Category => General Discussion => Topic started by: goodnightChesty1775 on October 25, 2011, 03:25:56 AM

Title: uber badass reloading set up
Post by: goodnightChesty1775 on October 25, 2011, 03:25:56 AM

im sure we all know about ultimate reloader, but man i saw this vid today and i just about came. man if you had this set up and PLENTY of components in WROL sit, my god you could supply an army, you could no doubt push out 1000rds+ a day.

AR-MPR Phase III Hornady Lock-N-Load Loading 223 (http://www.youtube.com/watch?v=5AfKR5cyqi4#ws)

Title: Re: uber badass reloading set up
Post by: WhiskeyJack on October 25, 2011, 06:42:27 AM

Skeet, Skeet.

Title: Re: uber badass reloading set up
Post by: gapatriot on October 25, 2011, 10:16:50 AM

.

Title: Re: uber badass reloading set up
Post by: Skippy00004 on October 25, 2011, 11:07:42 PM

Am I reading this right that it only costs just under $100???????

Title: Re: uber badass reloading set up
Post by: thatGuy on October 25, 2011, 11:34:27 PM

Quote from: wildturkey on October 25, 2011, 10:16:50 AM

works great if its virgin brass or once fired and doesnt have to be trimed after sizing.

That is the problem with progressive presses isn't it, I don't know of a single one that will kick out a case that is to long once you have sized it. Another thing that I don't understand is how does the primer pocket get cleaned?

Title: Re: uber badass reloading set up
Post by: gapatriot on October 26, 2011, 09:18:20 AM

.

Title: Re: uber badass reloading set up
Post by: WhiskeyJack on October 27, 2011, 02:09:14 AM

Quote from: wildturkey on October 26, 2011, 09:18:20 AM

Even with a turret press its to easy to miss a step, i was telling EJR that when i was setting up his press. If i want to do alot of rounds i will count out all my brass, size and deprime it all. then trim deburr and clean the primer pockets, then prime them all. then add powder and press in bullet one at a time. i have seen a few times where someone has poured powder into a bunch of cases then pressed bullets to get to the range and hang a bullet in the barrel because one of the rounds didnt get powder. reloading isnt something you want to rush there is just too much shit that can go wrong. start going too fast and you will damage your gun or end up hurting yourself.

Nicley said wild turkey Very good point man.