« previous next »
Pages: [1]

Author Topic: uber badass reloading set up  (Read 977 times)

goodnightChesty1775

  • Guest
uber badass reloading set up
« on: October 25, 2011, 03:25:56 AM »
im sure we all know about ultimate reloader, but man i saw this vid today and i just about came. man if you had this set up and PLENTY of components in WROL sit, my god you could supply an army, you could no doubt push out 1000rds+ a day.

AR-MPR Phase III Hornady Lock-N-Load Loading 223
Logged

Offline WhiskeyJack

  • Committed prepper
  • *****
  • Posts: 783
  • Karma: +2/-0
Re: uber badass reloading set up
« Reply #1 on: October 25, 2011, 06:42:27 AM »
Skeet, Skeet.
Logged
Good whiskey, makes Jack Rabbit smack da bear.

Offline gapatriot

  • Committed prepper
  • *****
  • Posts: 749
  • Karma: +1/-0
    • Homefront defense
Re: uber badass reloading set up
« Reply #2 on: October 25, 2011, 10:16:50 AM »
.
« Last Edit: November 10, 2011, 11:14:18 PM by wildturkey »
Logged

Offline Skippy00004

  • Committed prepper
  • *****
  • Posts: 567
  • Karma: +2/-0
Re: uber badass reloading set up
« Reply #3 on: October 25, 2011, 11:07:42 PM »
Am I reading this right that it only costs just under $100???????
Logged
Don't pay attention to the man behind the curtain...

"I do believe that, where there is only a choice between cowardice and violence, I would advise violence." --Mahatma Ghandi

Offline thatGuy

  • Kind Lover
  • Community Moderator
  • *****
  • Posts: 3454
  • Karma: +12/-0
    • thatGuy's youtube
Re: uber badass reloading set up
« Reply #4 on: October 25, 2011, 11:34:27 PM »
Quote from: wildturkey on October 25, 2011, 10:16:50 AM
works great if its virgin brass or once fired and doesnt have to be trimed after sizing.

That is the problem with progressive presses isn't it, I don't know of a single one that will kick out a case that is to long once you have sized it. Another thing that I don't understand is how does the primer pocket get cleaned?
Logged

Offline gapatriot

  • Committed prepper
  • *****
  • Posts: 749
  • Karma: +1/-0
    • Homefront defense
Re: uber badass reloading set up
« Reply #5 on: October 26, 2011, 09:18:20 AM »
.
« Last Edit: November 10, 2011, 11:14:34 PM by wildturkey »
Logged

Offline WhiskeyJack

  • Committed prepper
  • *****
  • Posts: 783
  • Karma: +2/-0
Re: uber badass reloading set up
« Reply #6 on: October 27, 2011, 02:09:14 AM »
Quote from: wildturkey on October 26, 2011, 09:18:20 AM
Even with a turret press its to easy to miss a step, i was telling EJR that when i was setting up his press. If i want to do alot of rounds i will count out all my brass, size and deprime it all. then trim deburr and clean the primer pockets, then prime them all. then add powder and press in bullet one at a time. i have seen a few times where someone has poured powder into a bunch of cases then pressed bullets to get to the range and hang a bullet in the barrel because one of the rounds didnt get powder. reloading isnt something you want to rush there is just too much shit that can go wrong. start going too fast and you will damage your gun or end up hurting yourself.

Nicley said wild turkey Very good point man.
Logged
Good whiskey, makes Jack Rabbit smack da bear.
Pages: [1]
« previous next »