« previous next »
Pages: [1]

Author Topic: Missing BCG  (Read 2249 times)

Offline Nemo

  • Hardcore Prepper
  • ******
  • Posts: 6557
  • Karma: +17/-2
  • From My Cold Dead Hands
Missing BCG
« on: January 28, 2020, 03:37:36 PM »
Am I missing it or is the kit missing the bolt carrier group. 

The rest looks like a good price for a reasonable build kit.

Nemo

https://www.midwayusa.com/product/1021106925
Logged
If you need a second magazine, its time to call in air support.

God created Man, Col. Sam Colt made him equal, John Moses Browning turned equality to perfection, Gaston Glock turned perfection into plastic fantastic junk.

Offline Erick

  • Committed prepper
  • *****
  • Posts: 989
  • Karma: +9/-0
Re: Missing BCG
« Reply #1 on: January 28, 2020, 05:13:41 PM »
The BCG is in the pic. Inside the rifle dust cover is open. :)
Logged
Every day, men who will follow orders to kill you, exercise. Do you?

Offline Nemo

  • Hardcore Prepper
  • ******
  • Posts: 6557
  • Karma: +17/-2
  • From My Cold Dead Hands
Re: Missing BCG
« Reply #2 on: January 28, 2020, 05:28:41 PM »
And if I looked at the pics there it would show the BCG and charging handle in the bottom one.  OK, point, laugh and sneer at me*.

Nemo  :suicide:


*but I think I might go ahead and get one and do some jigging.
« Last Edit: January 28, 2020, 05:32:53 PM by Nemo »
Logged
If you need a second magazine, its time to call in air support.

God created Man, Col. Sam Colt made him equal, John Moses Browning turned equality to perfection, Gaston Glock turned perfection into plastic fantastic junk.

Offline CJS06

  • Committed prepper
  • *****
  • Posts: 580
  • Karma: +3/-0
Re: Missing BCG
« Reply #3 on: January 29, 2020, 10:56:29 AM »
Nemo

That is not a bad price at all for that kit. One thing I would do is instantly replace the Bolt (not entire BCG).  I have seen at least 3 of the AR Stoner kits that have had bolt failures. The ones they are using are economy (thats how they keep the price of the kit down) and are not Magnetic Particle Inspected (MPI) or High Pressure Tested(HP).  They are splitting right at the pivot pin.
The same thing has been common in Ghost, Anderson, Radiacal and a number of other "low cost" options that are out there.  You dont NEED to replace it immediately, but I would have one ready to drop in.

Chris
Logged
Pages: [1]
« previous next »