Author Topic: Need an Antennae Holder Upper?  (Read 634 times)

Offline Nemo

  • Hardcore Prepper
  • ******
  • Posts: 6363
  • Karma: +17/-2
  • From My Cold Dead Hands
Need an Antennae Holder Upper?
« on: March 04, 2018, 04:14:03 PM »
Look at this thing.  I thought it was a right cool idea.

Nemo


https://tn07.com/2-and-one-half-inch-drive-on-mount
If you need a second magazine, its time to call in air support.

God created Man, Col. Sam Colt made him equal, John Moses Browning turned equality to perfection, Gaston Glock turned perfection into plastic fantastic junk.

Offline Jackalope

  • Administrator
  • *****
  • Posts: 2384
  • Karma: +11/-0
  • Free Citizen
Re: Need an Antennae Holder Upper?
« Reply #1 on: March 04, 2018, 05:05:46 PM »
Thank you for that Nemo, they have some interesting products.  I had never heard of the company before.  I like their hitch mounts, and the prices are reasonable.

Offline Nemo

  • Hardcore Prepper
  • ******
  • Posts: 6363
  • Karma: +17/-2
  • From My Cold Dead Hands
Re: Need an Antennae Holder Upper?
« Reply #2 on: March 04, 2018, 09:51:24 PM »
The drive on mount name was cool but I think my name creation is cooler.

Nemo  8)
If you need a second magazine, its time to call in air support.

God created Man, Col. Sam Colt made him equal, John Moses Browning turned equality to perfection, Gaston Glock turned perfection into plastic fantastic junk.

Offline pkveazey

  • Hardcore Prepper
  • ******
  • Posts: 2220
  • Karma: +5/-1
Re: Need an Antennae Holder Upper?
« Reply #3 on: March 05, 2018, 02:36:00 AM »
I've seen that done before. $150????? I don't think so. I prefer the old reliable trailer hitch mount. You push it into the hitch receiver and insert the pin and if you need to move your vehicle, you just move it.

Offline JohnyMac

  • Administrator
  • *****
  • Posts: 14774
  • Karma: +23/-0
Re: Need an Antennae Holder Upper?
« Reply #4 on: March 05, 2018, 09:47:07 AM »
To your point pkveazey, using your method produces a good ground plane to doesn't it.
Keep abreast of J6 arrestees at https://americangulag.org/ Donate if you can for their defense.

Offline Nemo

  • Hardcore Prepper
  • ******
  • Posts: 6363
  • Karma: +17/-2
  • From My Cold Dead Hands
Re: Need an Antennae Holder Upper?
« Reply #5 on: March 05, 2018, 10:13:00 AM »
Yeah and that could be an antennae holder upper/mover arounder all in one.

Nemo   ;D
If you need a second magazine, its time to call in air support.

God created Man, Col. Sam Colt made him equal, John Moses Browning turned equality to perfection, Gaston Glock turned perfection into plastic fantastic junk.

Offline Romeo Foxtrot

  • Prepper Apprentice
  • *
  • Posts: 18
  • Karma: +1/-0
Re: Need an Antennae Holder Upper?
« Reply #6 on: March 05, 2018, 04:13:33 PM »
Here's my solution:

based on 2" hitch mount....this slides in, locks in place and allows me to pivot it..i set it horizontal to install milmast pieces, connect antennas, j pole, yagi and hf di pole, feedline, walk it up to vertical, pin in place and guy it if need be based on height....

i can use the back on my suv, of the side mount on utility trailer...

this is a total one man operation....easy peasy...

« Last Edit: March 05, 2018, 04:16:01 PM by Romeo Foxtrot »

Offline JohnyMac

  • Administrator
  • *****
  • Posts: 14774
  • Karma: +23/-0
Re: Need an Antennae Holder Upper?
« Reply #7 on: March 05, 2018, 04:39:18 PM »
Cool..."easy peasy" Japanesey.  :cheers:
Keep abreast of J6 arrestees at https://americangulag.org/ Donate if you can for their defense.

Offline Jackalope

  • Administrator
  • *****
  • Posts: 2384
  • Karma: +11/-0
  • Free Citizen
Re: Need an Antennae Holder Upper?
« Reply #8 on: March 05, 2018, 05:39:24 PM »
I like that set-up RF.  I like to keep it simple.