Unchained Preppers
Communications => Comm Discussion => Topic started by: Sir John Honeybucket on August 29, 2022, 05:51:45 AM
-
One of the great aspects of solid state electronics is being able to easily improvise power sources. I did a similar thing once, using a treadle sewing machine, generator and regulator to power my now long gone, Ten Tec 505 qRP rig for a few QSOs.
https://youtu.be/_N-V61GRX6I (https://youtu.be/_N-V61GRX6I)
-
Coooooooooooool. :cheers:
-
I've got a similar set-up out in one of our sheds. Used an exercise bike, like in the video. However, the bike tire was removed, and in it's place there's a belt, which is connected to an old tape drive motor. I built a regulator for it too, and it terminates in a cord with an Anderson powerpole. It works well enough, I forget how many amps it puts out. It's a good device for kids that have too much energy. Have the kid pedal for 10-15 minutes, and it'll top off your batteries.
I had a Ten Tec 505 too, and a Power-Mite, and a 509, and a Century 21. The Century 21 was one of my favorites of the Ten-Tec radios, used it to get to 13 wpm for the General license, back in the day. Currently, the only Ten-Tec radio in the stable is an Omni D, which is the primary radio for CW here, so it doesn't get used much.
-
These posts remind me of when I was young and was in the Civil Air Patrol. We had a big old world War 2 tube type radio and receiver and when we were out in the field with no power, we had an old military surplus power generator. It looked like a bicycle with no wheels and we powered it by pedaling it like a bike. As soon as someone keyed the microphone and the transmitter kicked in, that SOB was hard as Hell to pedal. When we were just listening, it was almost effortless.