Unchained Preppers
Communications => Comm Discussion => Topic started by: Hope on July 14, 2024, 03:42:32 PM
-
I'm running on a linux machine, using flrig, currently have JS8call and Fldigi running at the same time, no problems with them, using Yaeus FT-891 and Pulse Audio.
I am am trying to use FSQ. My problem is the FSQ-ON button is yellow and I'm not sure how to get it to be green. I've checked settings, have a large bandwidth, and I'm on the proper frequencies. Any suggestions would be appreciated.
-
Need to move the squelch slider up.
FSQ will not allow you to TX when its yellow, it thinks its receiving something from someone else.
-
Unfortunately, even with the squelch slider all the way at the top, the FSQ-On button is still yellow. It seems that it is transmitting. I have a list of heard stations and sent a command to one of the stations to send an SNR report and a list of the stations they hear and it worked. But, I know something isn't right because it should be green.
-
I watched a video today with a guy using Linux and FSQ, his light was also yellow. I guess it does not matter as long as it is working and it seems to be working. I am just gonna let it go.