« previous next »
Pages: [1]

Author Topic: Rust On Truck Question  (Read 2842 times)

Offline JohnyMac

  • Administrator
  • *****
  • Posts: 14829
  • Karma: +23/-0
Rust On Truck Question
« on: June 09, 2015, 10:03:53 AM »
Two rust stains that seem to be coming from under the paint on my truck have appeared. The metal is solid it's just that the paint in the two area's is turning paint rust color. Any suggestions on what I should do?

Grind to bare metal and repaint or some other less drastic suggestion? 

« Last Edit: June 10, 2015, 09:55:08 AM by JohnyMac »
Logged
Keep abreast of J6 arrestees at https://americangulag.org/ Donate if you can for their defense.

Offline Nemo

  • Hardcore Prepper
  • ******
  • Posts: 6395
  • Karma: +17/-2
  • From My Cold Dead Hands
Re: Rust On Truck Question
« Reply #1 on: June 10, 2015, 12:41:30 AM »
HHHMMM Paint is turning paint color?  Seems you have good paint.

If that is some error or some sort and you have the rust you mentioned, try Evapo-Rust.  I have heard good things about it but no personal knowledge.

Nemo

http://www.evapo-rust.com/
Logged
If you need a second magazine, its time to call in air support.

God created Man, Col. Sam Colt made him equal, John Moses Browning turned equality to perfection, Gaston Glock turned perfection into plastic fantastic junk.

Offline JohnyMac

  • Administrator
  • *****
  • Posts: 14829
  • Karma: +23/-0
Re: Rust On Truck Question
« Reply #2 on: June 10, 2015, 09:58:27 AM »
Thx Nemo. The rust seems to be leaching through the paint from the inside. I can not get to the underside of the area to see if it is coming from the underside. I will get a picture later and post.
Logged
Keep abreast of J6 arrestees at https://americangulag.org/ Donate if you can for their defense.

brat

  • Guest
Re: Rust On Truck Question
« Reply #3 on: June 10, 2015, 09:32:24 PM »
There's a bunch of rust converters on the market. Most turn the rust to a black surface that you can lightly sand and paint. If you have a Home Depot or Tractor Supply or hardware story, they will carry some brand or other. I've used the converters on trailers, farm implements and mowers and such.

If it's coming from the back side though, you'll have to treat both side to kill it. If it's run under the paint job, that'll have to be removed.

If you wanna get to the nitty gritty, here's some info on a study about them.........

http://ncptt.nps.gov/wp-content/uploads/metal-paper-88.pdf?1ef327
Logged

Offline JohnyMac

  • Administrator
  • *****
  • Posts: 14829
  • Karma: +23/-0
Re: Rust On Truck Question
« Reply #4 on: June 11, 2015, 07:50:59 AM »
Thx brat!  :thumbsUp:
Logged
Keep abreast of J6 arrestees at https://americangulag.org/ Donate if you can for their defense.

gadget99

  • Guest
Re: Rust On Truck Question
« Reply #5 on: June 11, 2015, 09:09:17 AM »
Sounds like there is a bit of moisture ingress in the paint going on.

Due to the fact that I immediately repaint any vehicle I get with flat paint. I just get the sander out and take the offending areas down to metal. Apply some primer and cover it with flat black.

Then I am known for the flat black thing around here. I carry a bunch of different flat paints in spray cans in the back of my trunk so I can do a camouflage change up on the fly if SHTF. Flat black as the base and a case of spray cans for flexibility.

Just my thing really.

I do however suggest getting the sander out and getting the area down to bare metal to see how much rust is there.
Logged

Offline JohnyMac

  • Administrator
  • *****
  • Posts: 14829
  • Karma: +23/-0
Re: Rust On Truck Question
« Reply #6 on: June 11, 2015, 10:42:03 AM »
Yeah Gadget, I am afraid you are right.
Logged
Keep abreast of J6 arrestees at https://americangulag.org/ Donate if you can for their defense.
Pages: [1]
« previous next »